Back to the overview

The new Retrofit Wall Support

(Washington, Tyne and Wear, 14. July 2019) We’re delighted to introduce the new Retrofit Wall Support, which is exceptionally easy to install, comes with a Lifetime Guarantee, but also saves up to £120 on a typical Ø150 4.5 m bungalow installation using standard black painted components.

60mm to 200mm version and 200mm to 375mm version available

So, along with these amazing features and benefits, you are also rewarded Double Love2Shop Reward Points on any ICID or ICS installation using this component.

This component has been introduced to the range to allow for a simple, retrofit support, which has been designed to minimise the footprint of the side plates, whilst maximising the load bearing capability, allowing for one support to be used on most standard bungalow or 2 storey homes, supporting up to 10m of chimney.

Adjustable from between 60mm to 200mm from the wall, it allows for use with either 90 degree or 135 degree tees and can be retrofitted over the top of the standard pipe section immediately above the tee allowing for fast and simple installation.

The 200mm to 375mm version is ideal for using immediately above an offset, supporting the weight as the chimney goes around the eaves/guttering.

More related content

News

UE to ICID adjustable starter section

Introduced to the UE range.

Read now

News

Updated ICID G50 ventilated square, round and support firestop plates

ICID Plus has been tested and approved to meet the latest BS EN1856-1 requirements when passing through either combustible or non combustibl...

Read now

News

Our Award Winning ICID Plus Double Wall Adjustable Starter Section

Our new ICID Plus Double Wall Adjustable Starter Section is an easy and quick way of disconnecting a stove for inspection, as well as being ...

Read now