ME
The Metaloterm® ME system is a modular single wall flue/chimney system, made of stainless steel with a high temperature sealing ring. Metaloterm® ME is a universal flue/ chimney system which is suitable for both high and low temperatures, non-condensing and condensing applications with flue gasses in positive and negative pressure. It can resist a chimney fire. Therefor the system is suited for a wide range of applications such as boilers, stoves, ovens and as ventilation system. It can be used as a connection flue pipe or in renovation situations as a shaft liner. The product range also contains a wide variety of silencers. The system can also be used for CHP applications, in this case a special VITON® sealing ring might be necessary.
A modular single wall chimney system
The Metaloterm® ME system is a modular single wall flue/chimney system, made of stainless steel with a high temperature sealing ring. Metaloterm® ME is a universal flue/ chimney system which is suitable for both high and low temperatures, non-condensing and condensing applications with flue gasses in positive and negative pressure. It can resist a chimney fire. Therefor the system is suited for a wide range of applications such as boilers, stoves, ovens and as ventilation system. It can be used as a connection flue pipe or in renovation situations as a shaft liner. The product range also contains a wide variety of silencers. The system can also be used for CHP applications, in this case a special VITON® sealing ring might be necessary.
Applications
- Shaft liner in renovation projects
- Air inlet & ventilation systems
- Flue system for condensing heaters and boilers
- Chimney renovation
Advantages
- Stress free thermal expansion
- Can be connected to Metaloterm® MF
- High quality stainless steel system
- High temperature silicone sealing ring
- Universal application
- Light weight system
- Chimney fire resistant
Technical information
| Features | |
| Type | Chimney/Flue system/Connecting flue |
| Mode of operation | Dry / Wet |
| Pressure | Positive/negative pressure |
| Operating pressure | 5000 Pa |
| Operating temperature | 600 ° C negative pressure (N) 200 ° C positive (P / H) |
| Short-term temperature | 600 ° C negative pressure (N) 200 ° C positive (P / H) |
| Fuel | Oil/wood/coal/pellets normal (wood) gas |
| seal | Elastomer (in case flue gas temperatures exceed 200°C, sealants as well as the cap and sopor seals have to be removed before installation) |
| Inner shell | |
| Material | AISI 316L / EN 1.4404 |
| Wall thickness | Ø80 – Ø300: 0.5 mm Ø300 – Ø700: 0.6 mm Ø800 – Ø1000: 0.8 mm |
Typical installations
Offset calculator
With this calculation tool, you can calculate the required distances in two ways:
When the desired horizontal distortion is known and you want to know which degree position is right for the intended situation.
If you want to know what kind of horizontal and vertical warpage occurs when using a specific bend and intermediate length.
The relevant regulations (e.g. DIN 18160 Part 1) must be observed. If necessary, provide a cleaning or inspection opening. Subject to technical changes – dimensions in mm.
Downloads
Contact us
Do you have any questions about our METALOTERM ME stainless steel chimney system? Contact us.
The non-res range
Under the Metaloterm brand, we offer our customers single-walled, double-walled and concentric exhaust systems. Our single-walled, soot-fire-resistant and high-quality stainless steel systems are ideal for renovations and new buildings.
All products can be quickly assembled using a sleeve system and can be ordered in black, grey or anthracite. Our double-walled systems are also soot fire resistant and reusable. Thanks to an inner and outer jacket made of stainless steel and high-quality thermal insulation, there are no corrosion-causing cold bridges or thermal bridges. Our concentric systems have been tested with many device types in accordance with EN 613. You will also receive boiler connection pieces for each heat generator in black. Here, too, assembly is quick and uncomplicated thanks to our lightweight components.
AD
A modular pre-insulated exhaust system with a sealing sleeve
Double-walled system
ME
A modular, single-walled exhaust / exhaust air system with a special internal lip seal
Single wall system
MF
A modular, pre-insulated exhaust gas / exhaust air system with a special internal lip seal
Double-walled system
UE
A modular, air-gap-insulated exhaust system with a special internal lip seal
Double-walled system
US
A concentric air-exhaust system usable at high exhaust gas temperatures in negative pressure
Concentric system
XD
High performance single wall flexible liner for chimney relining.
Flexible liners
