STANDARD FLUE BOX
Designed for use with radiant and decorative gas fires complying to BS 7977-1. Constructed with an aluminium liner and coated steel outer case
| Radiant | |
|
Standard, Recessed, VRV T/Wall, VRV S/Wall, GF Box Suitable for radiant and convector radiant gas appliances using natural gas or liquid propane |
Diameter 125mm Flex conforming to BS EN1856-2 |
| Back boiler unit | |
|
Back Boiler Box for Flex
Combined Appliances: |
Diameter 125mm Flex conforming to BS EN1856-2 |
| Living Flame Fires | |
|
ILFE Box Flex/TecnoFlex Plus
Inset live fuel effect live fires up to 15kw |
Flex conforming to BS EN1856-2 Diameter as per appliance requirement |
STANDARD FLUE BOX
Designed for use with radiant and decorative gas fires complying to BS 7977-1. Constructed with an aluminium liner and coated steel outer case
RECESSED FLUE BOX
Designed with the spigot at the rear, for use with larger radiant and decorative gas fires. for gas fires to BS 7977-1.
ILFE FLUE BOX
For use with Inset Live Fuel Effect gas fires complying to BS 7977-1, with a heat output not exceeding 7kw.
LARGE FLUE BOX FOR BACK BOILER
Adjustable in depth from 358mm - 480mm to accommodate a wide range of back boilers. Suitable for fires complying with BS 7977-2. Universal opening allowing connection to the boiler with B Vent or Flex.
GF FLUE BOX
Single wall design with sloping back to help fit some openings. For radiant gas fires complying with BS7977-1.
VRV TWIN WALL FLUE BOX
Twin wall construction for reduced condensation. Otherwise as VRV Single Skin Box.
VRV SINGLE SKIN FLUE BOX
Suitable for fires complying with BS7977-1. Fits most popular radiant gas fires including the widely used Valor Firelite Oxysafe. Reduced height, extra depth and extra large flanges minimise builders work on installation.